When replacing the left and right turbocharger: Remount components

When replacing the left-hand turbocharger: Remount components 

• Unscrew the banjo bolt (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed out and remove the coolant pipe (1)  from the pin (arrowed).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unscrew the banjo bolt (1)  .
• Loosen screw (2)  .
• Remove the coolant pipe (3)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the banjo bolt.

  Parts:  Hollow bolt

• Replace seals (1)  .

  Parts:  Seals

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the right turbocharger.

  Parts:  Right turbocharger

• Position the coolant pipe (3)  .
• Position the banjo bolt (1)  and screw in several threads.
• Hand-tighten the bolt (2)  .
• Tighten the banjo bolt (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (2)  .

• Replace the banjo bolt.

  Parts:  Hollow bolt

• Replace seals (1)  .

  Parts:  Seals

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in and position the coolant pipe (1)  on the pin (arrowed).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the banjo bolt (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

When replacing the right turbocharger: Remount components 

• Unscrew the banjo bolt (1)  .
• Loosen screw (2)  .
• Remove the coolant pipe.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unscrew the banjo bolt (1)  .
• Loosen screw (2)  .
• Remove the coolant pipe (3)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the banjo bolt.

  Parts:  Hollow bolt

• Replace seals (1)  .

  Parts:  Seals

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the right turbocharger.

  Parts:  Right turbocharger

• Position the coolant pipe (3)  .
• Position the banjo bolt (1)  and screw in several threads.
• Hand-tighten the bolt (2)  .
• Tighten the banjo bolt (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (2)  .

• Replace the banjo bolt.

  Parts:  Hollow bolt

• Replace seals (1)  .

  Parts:  Seals

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the coolant pipe.
• Position the banjo bolt (1)  and screw in several threads.
• Hand-tighten the bolt (2)  .
• Tighten the banjo bolt (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (2)  .