Removing the socket for the cigarette lighter from the storage compartment in the center console
Preliminary work
- Refer to REMOVING THE REAR CENTER CONSOLE TRIM .
- Refer to REMOVING THE CENTER ARMREST STORAGE COMPARTMENT .
- Rotate the head of special tool (1) to the left until the marks (arrows) are face each other.
- Carefully insert special tool (1) into 12 V socket (3).
- If necessary, rotate special tool (1) carefully to the left until recesses (2) of special tool (1) are fixed in contacts (4) of 12 V socket (3).
- Rotate the head of special tool (1) to the right until special tool (1) is locked in 12 V socket (3).
- Unlock and remove connector housing (1) on the storage compartment in center console (2).
- Disengage and remove the LED (3) from the bracket.
- Pull the insert holder for cigarette lighter (1) out of the storage compartment in center console (2) using special tool 0 496 588 (61 0 250) in the arrow direction.