Installing the radio remote control receiver
- Correctly position the receiver for the radio remote control (3) .
- Fasten expanding rivet (1) .
- Connect plug (2) .
Follow-up work
- Refer to INSTALLING THE TOP PARTITION WALL TRIM PANEL .
- Refer to CONNECTING ALL BATTERY GROUND LEADS .
- Refer to INSTALLING REAR TRIM PANEL .
- Refer to INSTALLING THE SEAT BELT FINISHER STRIP .
- Refer to INSTALLING THE REAR SEAT .
- Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .