Installing the front section of the front wheel arch cover

• For replacement: 

  Position the brake ventilation duct (2).

  Tighten down screw (1).

  TIGHTENING TORQUES SPECIFICATION
  
  

  Brake ventilation duct on front wheel arch cover front section
  Hexagon screw for thermoplastic	Tightening torque	3 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: To provide a better overview: Schematic diagram with partially hidden components.
• Guide in front section (1) of the wheel arch cover at the front together with the brake ventilation duct (2).
• Tighten the screws (arrows).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING FRONT LEFT OR RIGHT WHEEL .