Installing C-pillar trim panel

Check 

• Check clip (1) on the C-pillar trim panel (2) for damage, replace if necessary.
• Check guides (3) for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

The guide is damaged.

Measure

• Replace the C-pillar trim panel.

• Thread in C-pillar trim panel (1) in the guides (3) to the rear.
• Clip in the clip (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  C-pillar trim panel on holder
  Oval-head screw M6	Tightening torque	3 Nm

• Clip in the cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to PARTIALLY INSTALLING THE SEAT BELT FINISHER STRIP .
• Refer to INSTALLING BACKREST SIDE SECTION .