Removing rear door window glass
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING THE REAR OUTER WINDOW RECESS FINISHER STRIP .
- Refer to RELEASING DOOR WINDOW AT REAR .
- Refer to REMOVING REAR DOOR TRIM .
- Refer to REMOVING THE MODULE BRACKET REARWARD .
- The rear door window glass (1) must be opened as shown so that the multi-tooth screws (2) are accessible.
- Unscrew multi-tooth screws (2) (turn to the right).NOTE: To provide a better overview: Schematic diagram with partially hidden components.
- Lift holder (1) onto the lug (2) in arrow direction.
- Guide the rear door window glass (3) out to the top.