Removing the center console
Preliminary work
- Refer to DEACTIVATING THE 48 V ELECTRICAL SYSTEM .
- Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
- Refer to REMOVING THE REAR CENTER CONSOLE TRIM .
- Refer to REMOVING THE CENTER ARMREST STORAGE COMPARTMENT .
- Refer to REMOVING CENTER ARMREST .
- Refer to REMOVING THE SPEAKER TRIM AT THE DASHBOARD .
- Refer to REMOVING CENTRAL INFORMATION DISPLAY (CID) .
- Refer to REMOVING CUP HOLDER .
- Refer to REMOVING THE WIRELESS CHARGING STORAGE .
- Refer to REMOVING THE CENTER STACK MODULE .
- Refer to REMOVING THE TRIM PANEL FOR PEDAL ASSEMBLY .
- Refer to REMOVING FOOTWELL TRIM PANEL ON THE RIGHT .
- Release the screw (1) the left footwell.
- Release the screws (1) the right footwell.
- Loosen screws (1).
- Loosen screws (1).
- Loosen nuts (1).
- Disconnect the connector (1).
- Release the wiring harness (2) from the center console.
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
- Carefully lift the rear of the center console (1).
- Unclip the wiring harness from the center console (1) and unlock and disconnect all the plug connectors.
- Feed out the center console (1) and remove it.