Installing the front rubber mount for the rear axle support

NOTE: Description is for left component only. Procedure on the right side is identical.

Alignment of the front rubber mount on rear axle support

Align front rubber mount (1) in direction of travel by means of the arrow on special tool 2 455 956 or on rubber mount (2) .
F = driving direction

(View of the rear axle support from above)

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the rubber mount (1) into the rear axle support using special tools 2 455 956 0 492 397 (33 4 140) 2 208 575 2 155 744 and 2 208 574 .
Remove the special tools.

Courtesy of BMW OF NORTH AMERICA, INC.