Removal Of The Luggage Compartment Center Floor Piece

NOTE: Perform the steps on the left and right side.

Open welded connections in area (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Perform coarse separating cut (1) as shown.
Release welded connections in areas (2) and remove section (3).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
For additional information see: 41 00...
Releasing bonded connections
Open welded connections in area (1).
Undo the self-tapping screws (2).
Release bonded connection in area (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Release the self-tapping screw and bonded connection in the area (1).
Release welded connections in areas (2).
(3) Remove luggage compartment floor.

Courtesy of BMW OF NORTH AMERICA, INC.