Supplying The New Parts Required
Precondition
- Vehicle is secured on the straightening bench.
NOTE:
TECHNICAL INFORMATION
- Observe the procedure for repair stage 3.
For additional information see: 41 00... Repair method for repair stage 3
- For information about stripping and rebuilding operations, refer to the surrounding text in the AIR. See the FRU number.
Preliminary work
- Prepare the following new parts (see Electronic Parts Catalog [EPC]):
Front wheel arch (1)
Carrier support, wheel arch, front (2)
Engine mount reinforcement (3)
Support bracket shaped part
NOTE: TECHNICAL INFORMATION
For additional information see: 41 00...
Overview of consumables in Electronic Parts Catalog - Supply the following consumables:
Material Quantity Adhesive K1 1 Blind rivet N1 65 Blind rivet N2 2 Blind rivet N3 3 Blind rivet N6 1 EMC screw 3 Cleaning agent R1 1 Cleaning agent R2 1 Sealing compound D1 Cavity protection wax remover