Remove bearing bracket for pedal mechanism

Preliminary work

Retract release tool 2 409 646 between brake pedal and brake booster.
Apply support (1) of the release tool 2 409 646 on the bearing bracket. If necessary, position the support by rotating the screw on the release tool.

Courtesy of BMW OF NORTH AMERICA, INC.
Push release tool 2 409 646 in the direction of the arrow and lever out the brake pedal from brake booster.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The following step(s) must be performed if the listed component(s) is/are installed.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The following step(s) must be performed if the listed component(s) is/are installed.

Unlock plug connection (1) and disconnect.

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen nuts (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Release screw (1) and remove bearing bracket (2).

Courtesy of BMW OF NORTH AMERICA, INC.