Installing rear wheel speed sensor

• Clean the bore for the wheel speed sensor and grease it with lubricating grease (see applicable BMW parts catalogue).

• Install rear wheel speed sensor.
• Replace the screw (2).

  Parts:  Screw

• Position and tighten the screw (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Hook the cable of the wheel speed sensor into the holder (1).
• Hook the cable of the wheel speed sensor into the holders (1).
• Connect plug connection and close housing (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the wheel arch cover in the area (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING REAR LEFT OR RIGHT WHEEL .