Removing the convertible top latch

Precondition 

• Battery charger connected.

Preliminary work 

• Refer to REMOVING WINDSHIELD PANEL TRIM .

• Release the blind rivet (1).
• Remove the hall-effect sensor (2) and feed it out.
• Open retaining clips (3) and unclip the spherical head (4).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mark the position of the convertible top latch (3) at areas (1).
• Loosen nuts (2).
• Remove the convertible top latch (3).

  Courtesy of BMW OF NORTH AMERICA, INC.