Install front underbody protection
NOTE:
TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.
Different variants may be installed depending on the vehicle equipment.
- Version A:
Insert and position the front underbody protection (1).
Tighten screws (arrows).
TIGHTENING TORQUES SPECIFICATIONUnderbody protection screw Tightening torque 3 Nm - Version B:
Insert and position the front underbody protection (2).
Tighten down screws (1).
TIGHTENING TORQUES SPECIFICATION
| Underbody protection | ||
|---|---|---|
| screw | Tightening torque | 3 Nm |