Installing the top partition wall trim panel

• Position the trim panel of the top partition panel (1) and feed in the seat belts (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure the expanding rivets (arrow) on the top partition wall trim panel (2).
• Tighten down screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Trim panel to bracket of rollover protection
  Oval-head screw	tightening torque	2.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (3).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Stop pad to rollover protection
  Set screw M6x20	Tightening torque	4.5 Nm

• Secure the buffer (2) on the top partition wall trim panel (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (3).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Trim panel to bracket of rollover protection
  Oval-head screw	tightening torque	2.5 Nm

• Clip in the lid (2) on the top partition wall trim panel (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING REAR HEAD RESTRAINT .
• Refer to INSTALLING LEFT AND RIGHT REAR SIDE TRIM PANEL .
• Refer to INSTALLING THE SEAT BELT FINISHER STRIP .
• Refer to INSTALLING THE REAR SEAT .
• Refer to INSTALLING THE WINDOW CHANNEL STRIP AT REAR OUTER LEFT AND RIGHT .
• Refer to INSTALLING THE INNER DOOR SILL COVER STRIP ON THE LEFT AND RIGHT .