Installing the rear side window

• Use a scraper to remove the adhesive bead from the body and, if necessary, from the side window.
  NOTE: TECHNICAL INFORMATION 
  Protect components against corrosion.
  Treat paint damage with corrosion protection.
• Remove the residues of guide pins (1) and the Dual Lock tape (2) and clean the bonding surfaces.

  Courtesy of BMW OF NORTH AMERICA, INC.

  CONSUMABLE SPECIFICATION
  
  

  Cleaning agent R2

  500 ml

  83190417324

• Replace the Dual Lock tape (2).

  Parts:  Dual Lock tape

• Apply Dual-Lock tape (2) in the area shown on the body.

Check 

• Check tabs (1) on the trim strip on the rear side window (2) for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

The lugs (1) are damaged.

Measure

• Replace trim strip on the rear side window (2).

• Clip the trim strip (1) at the rear side window (2) into place.

  Courtesy of BMW OF NORTH AMERICA, INC.

• a	Position of adhesive bead	2 ±1 mm
  b	Width of adhesive bead	8 ±2 mm
  C	Height of adhesive bead	13 +2 mm

  When reusing side window:

  Remove remnants of the Dual-Lock tape (1).

  Clean the bonding surfaces and apply the new Dual Lock tape (1).

• Clean the bonding surfaces on the side window and the body.
• When reusing the side window, apply the adhesive bead to the cut back adhesive bead of the side window.
• When using a new side window, apply the adhesive bead to the cut back adhesive bead of the side window.
• Apply adhesive bead as shown along the PVC encapsulation (3).
• Apply bead joint in area (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  Conduct the following operation with the assistance of a second person.
• Align the side window (1) with the special tool 0 492 609 (51 3 010) on the side wall and guide in with the  guide pins.
• Press the side window (1) onto the Dual-Lock tape.
• Secure the side window (1) with the yellow plastic adhesive tape.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE TRIM STRIP .
• Refer to INSTALLING C-PILLAR TRIM PANEL .
• Refer to PARTIALLY INSTALLING THE SEAT BELT FINISHER STRIP .
• Refer to INSTALLING THE TRIM PANEL FOR THE BODY PILLAR (PARTIALLY REMOVED) .
• Refer to INSTALLING REAR TRIM PANEL .
• Refer to INSTALLING THE INNER DOOR SILL COVER STRIP .
• Refer to INSTALLING THE REAR SEAT .