Installing windshield

Courtesy of BMW OF NORTH AMERICA, INC.

Prepare the adhesive.

ADHESIVE SPECIFICATION

Window glass adhesive (single cartridge)	300 ml, Rest of World	83192289286
	300 ml, USA	83192289181
	300 ml, CHN	83192180002

Use standard nozzle C.

TECHNICAL DATA SPECIFICATION

C-nozzle
For windshields, rear windows, and body-specific side window glass	Diameter A	7.5 +1 -1 min
	Height B	13 +1 -1 mm

CONSUMABLE SPECIFICATION

C-nozzle

83192155589

Apply adhesive bead inside the marks (1) perpendicular to the windscreen.

TECHNICAL DATA SPECIFICATION

Adhesive bead of the windshield
	Width a	8 +3 -1 mm
	Height b	12 +1 -2 mm
	Processing time	max. 7 min

Courtesy of BMW OF NORTH AMERICA, INC.

Coat bead joint.
NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.
Carefully feed in the windshield with the special tool 0 492 609 (51 3 010) between the hood and the windshield panel.
Fit the windshield at top.
Evenly align the windshield at left and right.
Fit the windshield at the bottom and press.
Press the windshield upward until the rubber frame of the windshield evenly makes contact with the roof.
Secure the windshield in this installation position with the yellow plastic adhesive tape (1).

Courtesy of BMW OF NORTH AMERICA, INC.

CONSUMABLE SPECIFICATION

Yellow plastic adhesive tape

83199410979

TECHNICAL DATA SPECIFICATION

Gap dimension windshield to roof outer skin
1 windshield; 2 roof a outer skin	a	4.3 +1.2 -1.2 mm
Courtesy of BMW OF NORTH AMERICA, INC.	b	0.9 +1 -1.5 mm