Replacing left and right water pipe element
- Replace water guide element (1)
on the left and right.
Parts: Water guide element
Do not mix up the left and right water guide elements .
- Clean bonding surface.CONSUMABLE SPECIFICATION
Cleaning agent R2 500 ml 83190417324 - Detach the liner from the water pipe element (1) .
- Align the water pipe element (1)
to the mark (dashed line) of the A-pillar (3)
.
The water guide element (1) must remain under the mount (2) of the hood seal as shown.
- Align the water guide element (1) flush with the A-pillar (3) as shown and press firmly into place.