Insert top automatic air flap control

• Guide in partial wiring harness (2) into the air flap control at top.
• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach air flap control at top and clip it in downwards with the detents (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (1) and (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Air flap control on front end
  Oval-head screw with spring washer	Tightening torque	4 Nm
  Flat-head screw M6x35	Tightening torque	4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in vehicle wiring harness with the holder (2).
• Connect connectors (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING FRONT BUMPER COVER .
• Refer to PARTIALLY INSTALLING THE TEMPERATURE SENSOR .
• Refer to PARTIALLY INSTALLING BOTH FRONT WHEEL ARCH COVERS .
• Refer to INSTALLING CENTER RADIATOR GRILLE .
• Refer to INSTALLING THE CENTER ENGINE COMPARTMENT COVER .