Install the remote control receiver
- Connect connector (3).
- Position remote control receiver (2).
- Fasten expanding rivet (1).
Follow-up work
- Refer to INSTALLING THE TRIM PANEL FOR THE STORAGE SHELF .
- Refer to INSTALLING THE C-PILLAR TRIM PANEL ON THE LEFT AND RIGHT .
- Refer to INSTALLING THE LEFT AND RIGHT SEAT BELT FINISHER STRIP .
- Refer to INSTALLING BOTH REAR SIDE TRIM PANELS .
- Refer to INSTALLING THE REAR SEAT .
- Refer to INSTALLING THE INNER DOOR SILL COVER STRIP ON THE LEFT AND RIGHT .