Installing the lock for the rear seat backrest

• Position lock for the backrest covering (2).
• Clip in the Bowden cable (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the lock for the backrest covering (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Backrest lock to body
  M8	tightening torque	19 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE TRIM PANEL FOR THE STORAGE SHELF .