Remove the seat cover for the front seat
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Loosen all clamp on the trim wires (1)
.
- Remove any remaining clamp from the seat cover and the upholstery.
- Thread out rubber band (2)
.
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Loosen all clamps on the trim wires 1.
- Remove any remaining clamp from the seat cover (2)
and the upholstery.
- Remove the seat cover (2)
from the upholstery.
 Courtesy of BMW OF NORTH AMERICA, INC.
|