Installing the cover for the cross member

• Position the cover for the cross member (2)  .
• Secure the expanding rivet (Pfeile)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE TOP PARTITION WALL TRIM PANEL .
• Refer to INSTALLING REAR HEAD RESTRAINT .
• Refer to INSTALLING LEFT AND RIGHT REAR SIDE TRIM PANEL .
• Refer to INSTALLING THE SEAT BELT FINISHER STRIP .
• Refer to INSTALLING THE REAR SEAT .
• Refer to INSTALLING THE WINDOW CHANNEL STRIP AT REAR OUTER LEFT AND RIGHT .
• Refer to INSTALLING THE INNER DOOR SILL COVER STRIP ON THE LEFT AND RIGHT .