Installing the tail light on the tailgate on the left and right
NOTE:
Description is for left component only. Procedure on the right side is identical.
Install the tail light on the trunk lid
- Connect and lock the connector (2) and position the tail light correctly on the tailgate (1).
- Replace screws (1).
Parts: Screws
- Tighten down screws (1).TIGHTENING TORQUES SPECIFICATION
Tail light at trunk lid Oval-head screw M5x14
Replace screws.Tightening torque 5.5 Nm
Follow-up work
- Refer to INSTALLING THE WATER SUPPLY TO THE REAR LEFT AND RIGHT LIGHT .
- Refer to INSTALLING THE TAILGATE TRIM PANEL .
- Refer to ATTACHING THE TRIM PANEL FOR THE TAILGATE HINGE ON THE LEFT AND RIGHT .
- Refer to INSTALLING TRUNK COMPARTMENT LIGHT ON TRUNK LID .
- Refer to INSTALLING THE POWER TAILGATE SWITCH .