Installing the LED turn signal

Check the seal (1) on the LED turn signal (2) for damage and replace it if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect the plug connector (1) to the LED turn signal (2) and lock it.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the LED turn signal (2) on the headlight.

Tighten down screws (1).

TIGHTENING TORQUES SPECIFICATION

LED turn signal on headlight
Screw	tightening torque	1.5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.