Installing vehicle electrical system support battery

• Install the battery (4).
• Connect the vent hose (1).
• Position the battery carrier and tighten it with the bolt (3).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Battery carrier to body in engine compartment
  Screw	tightening torque	15 Nm

• Join positive battery terminal at positive battery pole.
• Tighten the nut on the positive battery terminal (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING TENSION STRUT ON SHOCK TOWER .
• Refer to ATTACHING WINDSHIELD PANEL COVER .
• Refer to INSTALLING LEFT AND RIGHT WIPER ARM .
• Refer to INSTALLING THE REAR RIGHT ENGINE COMPARTMENT COVER .
• Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .
• Refer to REGISTER BATTERY CHANGE .