Remove power distributor on the rear positive battery cable

Preliminary work 

• Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
• Refer to REMOVING THE LOADING EDGE TRIM .
• Refer to REMOVING RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .

• Unfold the cover (1).
• Loosen nut (2).
• Remove positive battery cable (3).
• Unlock and disconnect connector (4).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen nut (1).
• Guide out the power distribution box of the positive battery cable (2).

Courtesy of BMW OF NORTH AMERICA, INC.