Installing the ornamental grille in the center bumper cover

Check 

• Check detents (1) for damage.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Result 

  » The detents are damaged.

  Measure

  • Replace the front bumper cover.
• Position the ornamental grille in the center bumper cover and clip it into the detents (4).
• Hook the wiring harness (1) into the holder (3) at the ornamental grille in the center bumper cover and attach it with the holder (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING BOTH ORNAMENTAL GRILLES IN BUMPER COVER ON THE SIDE .
• Refer to INSTALLING FRONT BUMPER COVER .
• Refer to PARTIALLY INSTALLING THE TEMPERATURE SENSOR .
• Refer to PARTIALLY INSTALLING BOTH FRONT WHEEL ARCH COVERS .
• Refer to INSTALLING CENTER RADIATOR GRILLE .
• Refer to INSTALLING THE CENTER ENGINE COMPARTMENT COVER .