Install the rear top cross connection
- Guide the cross connection (3) in from the rear in the direction of the arrow.
- Tighten down screws (1) and (2).
TIGHTENING TORQUES SPECIFICATION
| Top rear cross connection | ||
|---|---|---|
| Torx screw M8x30 | tightening torque | 19 Nm |
| Hexagon screw M8x20 |
tightening torque | 19 Nm |
Follow-up work
- Refer to INSTALLING UPPER CROSS CONNECTION .
- Refer to INSTALLING BOTH FRONT-END STRUTS .
- Refer to INSTALLING THE CENTER ENGINE COMPARTMENT COVER .