Install rear trim panel

• Check the clips (1) on the side trim panel (2) for completeness and damage and replace if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock all the connectors on the rear side trim panel (1) of the wiring harness (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip the rear side trim panel (1) into the clamps (3) and feed it into the edge protection.
• Clip in the rear side trim panel (1) with the clips (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE INNER DOOR SILL COVER STRIP .
• Refer to INSTALLING THE REAR SEAT .