Removing the steering wheel (sports steering wheel)

WARNING: Pyrotechnic components.
Danger! Immobilization period-threatening injuries!

All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
Replace any damaged part or ones that have been dropped.
For additional information see: SAFETY REGULATIONS ON HANDLING COMPONENTS WITH GAS GENERATORS .

NOTE: TECHNICAL INFORMATION
Wheel alignment is not necessary after removal, installation or replacement.

Preliminary work

Refer to DEACTIVATING THE 48 V ELECTRICAL SYSTEM .
Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
Refer to REMOVING THE AIRBAG UNIT (SPORTS STEERING WHEEL) .

NOTE: TECHNICAL INFORMATION
When releasing the screw, have a support person brace the steering wheel in order to reduce torque on the steering column!

Shift the steering wheel and wheels to the straight-ahead position.
Unlock plug connection (1) and disconnect.
If installed: Unlock plug connection (2) and disconnect.
Release the screw (3) and detach and remove the steering wheel.

Courtesy of BMW OF NORTH AMERICA, INC.