37 14 Electric Components
37 14 TIGHTENING TORQUE OVERVIEW
| Control unit bracket to body | ||
| M6x18 screw Replace screw. |
tightening torque | 11.8 Nm |
| Nut M6 | tightening torque | 4.5 Nm |
| Holder, ride height sensor, at the body | ||
| M6 | tightening torque | 8 Nm |
| Jointed rod ride height sensor on wishbone | ||
| M6 | tightening torque | 8 Nm |
| Jointed rod to ride height sensor | ||
| M6 | tightening torque | 8 Nm |
| Ride height sensor holder to rear axle support | ||
| M6 Replace screw. |
tightening torque | 11.8 Nm |
| Ride height sensor to holder | ||
| M5 | tightening torque | 5 Nm |
| VDP control unit to holder | ||
| M6 | tightening torque | 6 Nm |
| Vertical acceleration sensor to swivel bearing | ||
| M6 | tightening torque | 10 Nm |
| Vertical acceleration sensor to wheel carrier | ||
| M6 | tightening torque | 10 Nm |