Install ride height sensor, front
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Attach connector (2) at ride height sensor (1) and lock.
- Secure the wiring harness (3) on the holder of the ride height sensor.
- Position ride height sensor (1) on the body.
- Tighten down screw (2).
TIGHTENING TORQUES SPECIFICATION
| Holder, ride height sensor, at the body | ||
|---|---|---|
| M6 | tightening torque | 8 Nm |
- Position jointed rod (2) on upper wishbone.
- Tighten nut (1).
TIGHTENING TORQUES SPECIFICATION
| Jointed rod ride height sensor on wishbone | ||
|---|---|---|
| M6 | tightening torque | 8 Nm |
Follow-up work
- Refer to INSTALLING FRONT LEFT OR RIGHT WHEEL .
- Refer to CARRYING OUT RIDE HEIGHT ADJUSTMENT .
- Refer to RESETTING THE TIRE PRESSURE MONITOR .
- Refer to ADJUSTING HEADLIGHTS .