3121 Wheel Bearings And Steering Knuckle
3121 TIGHTENING TORQUE OVERVIEW
| Damper weight to swivel bearing | ||
| M6 Replace screw. |
tightening torque | 12 Nm |
| Wheel bearing to swivel bearing | ||
| M12 Replace spherical collar screws. Tighten the spherical-collar screws in crosswise sequence. |
The tightening sequence must strictly be followed and carried out on all spherical-collar screws at the same time! | |
| Tightening torque | 20 Nm | |
| Initial torque | 140 Nm | |
| Unscrew all bolts. | max. 45° | |
| Tightening torque | 120 Nm | |
| Angle of rotation | 90° | |