Install the central information display (CID)
NOTE:
RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.
Electrostatic discharge.
Damage to or destruction of electrical components.
- Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see: NOTES ON ESD (ELECTROSTATIC DISCHARGE) PROTECTION .
- Position the Central Information Display (CID) (2).
- Connect connectors (1) and lock.
- Insert the central information display (CD) (2) from above in the dashboard and correctly position.
- Tighten down screws (1).TIGHTENING TORQUES SPECIFICATION
Central information display to dashboard Screw tightening torque 2.4 Nm
Follow-up work
- Refer to INSTALLING THE SPEAKER TRIM AT THE DASHBOARD .
- Refer to CONNECTING ALL BATTERY GROUND LEADS .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .