Partially installing both B-pillar trim panels at top
NOTE:
Description is for left component only. Procedure on the right side is identical.
Partially installing top B-pillar trim panel
- Check the clips (1) for damage and replace if necessary.
- Feed upper seat belt (2) into top B-pillar trim panel (1).
- Feed top B-pillar trim panel (1) into guides (2).
- Feed in top B-pillar trim panel (1) with center B-pillar trim panel (3) under lips of edge protection at front and rear.
- Clip in top B-pillar trim panel (1) with clips (4).