Remove the test gauges for securing the camshafts
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.
- Remove screws (arrows).
- Thread out the test gage (1) from the set of special tools 2 358 122 between the intake camshaft and the basic carrier of the set of special tools 2 456 372 and remove.
- Thread out the test gauge (2)
from the set of special tools 2 358 122
between the exhaust camshaft and the basic carrier of the set of special tools 2 456 372
and remove.