Remove front engine encapsulation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Hot surfaces.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
Preliminary work
- Refer to REMOVING THE ACOUSTIC COVER .
- Refer to REMOVING INTAKE SILENCER HOUSING .
- Refer to REMOVING TOP CLEAN AIR PIPE .
- Unlock the ventilation line (1), detach it off the tank vent valve and unclip in the highlighted area.
- Unlock and detach the ventilation line (2).
- Unlock and detach the connectors (1) and (2).
- Unclip the wiring harness (3) in the highlighted areas and put to one side.
- Undo screw for the ground cable if necessary.
- Carefully remove the engine encapsulation (1).