Lowering the engine and detaching the engine bridge

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.

Turn the special tool 2 361 506 (00 6 103) to lower the engine until it lies completely on the engine mounts.

Courtesy of BMW OF NORTH AMERICA, INC.
Release the special tool 0 490 579 (11 0 070) from the mounting brackets (1) and (2) .
Remove the special tool 0 490 579 (11 0 070) from the engine bridge.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
Conduct the following operation with the assistance of a second person.
Carefully remove the engine bridge (1) with help from a support person.

Courtesy of BMW OF NORTH AMERICA, INC.
Version without front mounting bracket:
Loosen the screws (1) from the special tool 2 459 012 .

Guide out and remove the special tool 2 459 012 on the cylinder head.

Courtesy of BMW OF NORTH AMERICA, INC.