Remove clean air pipe
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work
- Refer to REMOVING THE ACOUSTIC COVER .
- Refer to REMOVING RESONATOR .
- Version A: NOTE: The following step(s) must be performed if the listed component(s) is/are installed.
- Loosen clamp (1).
- Unlock plug connection (1) and disconnect.
- Unlock lock (2).
- Feed the engine ventilation line (3) out and set it aside.
- Unfasten clamp (4).
- Feed out the clean air pipe (5) upwards and put it aside.
- Unlock lock (1).
- Guide the line (2) out and set it aside.
- Unlock lock (3).
- Guide the line (4) out and set it aside.
- Unlock the clamp (1).
- Feed out clean air pipe and remove (2).
- Version B:
- Unlock the locks (1).
- Detach the engine ventilation line (2).
- Unlock plug connection (1) and disconnect.
- Unlock and detach the line (2).
- Loosen clamp (3).
- Loosen clamp (4).
- Feed out the clean air pipe (5) upwards and put it aside.
- Unlock the clamp (1).
- Feed out the clean air pipe (2) and remove.