Install clean air pipe, top
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.
- Check rubber mount (1) for correct fit.
- Insert and install the clean air pipe on top (2) on the resonator (3).
The locks (1) must engage audibly.
- Insert and install the clean air pipe on top (2) with the resonator (3).
The resonator (3) must engage audibly in the rubber mounts.
- Tighten clamp (1).
TIGHTENING TORQUE SPECIFICATIONS
| Upper clean air pipe to lower clean air pipe | ||
| Hose clamp | Tightening torque | 3 Nm |
Follow-up work
- Refer to INSTALLING INTAKE FILTER HOUSING .
- Refer to INSTALLING THE RIGHT FRONT-END STRUT .