Remove oil sump

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.

Unlock and disconnect connector (1).
Release the cable from the clips (2) of the oil sump.

Courtesy of BMW OF NORTH AMERICA, INC.
Unscrew the transmission bolts (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1), (2) and (3).

Fig 1: Oil Sump Screws Loosening Sequence
Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1) to (7).

Fig 2: Oil Sump Screws Loosening Sequence
Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1) to (7).

Fig 3: Oil Sump Screws Loosening Sequence
Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1) and (2).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
Increased force may be necessary during disassembly because the component is bonded with liquid sealing compound.

Loosen the oil sump in the marked areas with suitable tools (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Remove oil sump (1) from the bottom rear.

Courtesy of BMW OF NORTH AMERICA, INC.