Remove both actuators (engine removed)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The figure shows the rear of the engine.
- Unlock and disconnect both connectors (1).
NOTE:
The figure shows the rear of the engine.
- Position special tool 2 360 895
correctly.
- Twist the actuator (1) of the intake side with the special tool 2 360 895
by about 50° in the direction of the arrow and remove it.
- Twist the actuator (1) of the exhaust side with the special tool 2 360 895 by about 50° in the direction of the arrow and remove it.