Install both actuators (engine removed)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The figure shows the rear of the engine.
- Position special tool 2 360 895
correctly.
- Position the actuator (1) of the exhaust side and turn in the arrow direction with the special tool 2 360 895
until the limit stops tap the clamps.
- Position the actuator (1) of the intake side and turn in the arrow direction with the special tool 2 360 895 until the limit stops tap the clamps.
NOTE:
The figure shows the rear of the engine.
- Connect both connectors (1) lay the cable correctly.