Blocking the camshafts

Check 

• Check whether the marks (1) on the intake and exhaust camshafts can be read from above.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» Marks (1) cannot be read from the top.

Measure

• Turn the camshafts to the correct position or readjust the valve timing.

Check 

• Check whether the center of the three flattened areas (1) on both camshafts points upwards. The special tool 2 358 122 can also be mounted when the camshafts are twisted by 180° (central flattened area points downwards).

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» The center of the three flattened areas (1) does not point upwards.

Measure

• Turn the camshafts to the correct position such that the center of the three flattened areas (1) on both camshafts points upwards.

• The cam on the exhaust camshaft on the first cylinder points obliquely inwards to the right.

  Courtesy of BMW OF NORTH AMERICA, INC.

• The cam on the intake camshaft on the first cylinder points obliquely to the left.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Keep the set of special tools 2 358 122 ready:

  Number	Description
  1	Basic carrier
  2	Basic carrier screws on cylinder head
  3	Gauge to fix exhaust camshaft
  4	Gauge to fix intake camshaft
  5	Screw gauge on basic carrier

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure the basic carrier (1) of the special tool 2 358 122 with the screws (2) the cylinder head.
• Position gauge (3) with the recess on the exhaust camshaft and fix with the screws (5) on the basic carrier (1).
• Position gauge (4) with the recess on the intake camshaft and fix with the screws (5) on the basic carrier (1).

Courtesy of BMW OF NORTH AMERICA, INC.