Securing the EPS wiring harness to the electromechanical steering gear
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.
- Position the holder (2) with the wiring harness.
- Tighten down screws (1).TIGHTENING TORQUES SPECIFICATION
Holder on steering gear M6 Tightening torque 8 Nm - Clip in the wiring harness (2) in the holder (3).
- Connect connectors (1) and lock.
- Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATION
| Holder on steering gear | ||
|---|---|---|
| M6 | Tightening torque | 8 Nm |