Removing the engine from the assembly jig
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Heavy component.
Heavy components can lead to injury or damage.
Heavy components can lead to injury or damage.
- Remove and install heavy components with the aid of another person/other persons.
- Stage the workshop crane 2 220 718.
- Prepare the special tool (lifting equipment) 0 490 567 (11 0 020)
.NOTE: TECHNICAL INFORMATION
The workshop crane, lifting equipment, and mounting brackets on the engine must be connected to each other in such a way that the engine hangs straight when being lifted. - Connect both hooks of the special tool 0 490 567 (11 0 020) to the front and rear of the engine with the mounting brackets.
- Connect the workshop crane 2 220 718
to the special tool (lifting equipment) 0 490 567 (11 0 020)
.
- Slacken nuts (1).
- Unclamp the clamp jaws of the special tool (motor mount) 2 413 082
in the direction of the arrow.
- Raise the engine slowly.
- Unscrew the screws (marks) and remove the special tool 2 411 718 .