Removing special tool from the cylinder head
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen screws (1).
- Guide the special tool 2 459 012
out and remove.
- Feed in and install the wiring harness section (1) for sensor system 2.
- Make sure that you can hear the locks (arrows) engage.