Remove left and right output shaft
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform the steps on the right and left side.
Remove output shaft
Remove output shaft
NOTE:
TECHNICAL INFORMATION
Secure component against falling.
Secure component against falling.
- Position the aluminum drift (2) on the output shaft (1).
- Knock out the output shaft (1) out of the front axle transmission or the bearing bracket with the aluminum mandrel (2).
- Guide out the output shaft (1) in the arrow direction and remove.