Releasing the left and right output shaft from wheel bearing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Perform the steps on the left and right side.

Loosen the output shaft from the wheel bearing

Press brake pedal.
Loosen the collar screw (1).
Do not let the output shaft hang on the joint; if necessary, tie up the output shaft.

Courtesy of BMW OF NORTH AMERICA, INC.